One perk of having your home security system set up by trained experts is that you seldom need to concern yourself with it. Even so, there will likely be a few instances when you have to reset your alarms in Auburn. If you’re utilizing a smart command panel, your system reset usually takes a couple button tap when you’ve experienced common events like false alarms and battery changes.
Check Your Owner’s Manual Before Attempting An Alarm Reset
A word to the wise before you start resetting your Auburn home security system, check your owner’s manual first. You’ll never want to undermine your property’s defense as a result of touching the wrong button. In addition, control panels could have changed if you upgraded from a number pad to a modernized touchscreen interface. Keep in mind that if you can't reset your system, don't be reluctant to contact the experts.
Resetting Your Auburn Home Security System Because Of A False Alarm
Usually, a false alarm takes place because of an accidentally tripped sensor. You are able to engage the ADT Command touchscreen or bring up your ADT smartphone app and touch the shield icon and type in your security code to switch off the alarms when this occurs. You could receive notification from your monitoring professionals, but just tell them it was a false alarm.
Resetting Your Alarm When Experiencing A Power Outage In Auburn
If the power goes out from a storm or other event, you could start to hear a steady beep from your control panel. This signifies that your security is being powered by the battery backup. To reset the alarm and stop the beeping, you need to take steps to disarm and rearm your security.
But please note, if you lose power for a longer period of time, you might need a full system reset. Follow the instructions in the manual -- usually by submitting your unique passcode and tapping the on/off button two times -- and you should be back to normal. You may continue to notice the auxiliary power beeping, as it might not stop until your battery is fully charged. Contact your home security specialists if you are still having issues with your ADT system 20 hours after the power is resumed.
When You Need To Reset Your Home Security System After Changing A Battery
Occasionally you will have to replace a battery within one of the devices in your security installation. To do this, you should set your system to test mode so you avoid triggering an alarm by accident. When the you replace the old battery, change the alarm from Test Mode and restore normal operations. If the control panel is unable to register the component or the battery light is still on, you might need a total reset of the system.
Reset Your Auburn Security System Following The Addition Or Deletion Of Someone
Adding and deleting people can be completed on the ADT Command panel and the ADT Control mobile app. You shouldn't need a reset of your alarm when deleting or adding a user or code. With that being said, if you move into a new home with an existing ADT alarm system, you'll want to call your home security professional at (334) 219-8276 to start a new service. The technician will go on site to upgrade equipment, install other devices (if necessary), and do a factory reset.
A Well-Designed Security System Is Only A Call Away
Attempting to reset a home security system in Auburn will likely be frustrating if it isn’t equipped with user-friendly equipment and instructions. If the time has come to find your intuitive alarm system, contact (334) 219-8276 or submit the form below. Our specialists are pleased to design the right security system for your needs.